 |
TEAC F/W Updater for
CD-W524E ( Ver.1.2.0.0 ) download |
[ 2003.03.27 Released] |
|
|
Updated
Firmware Revisions and Utilities List |
Name |
Software Version |
Date |
UpdaterW524E.exe |
1.2.0.0 |
2003/03/27 |
This program updates
the firmware revision from 1.0A/B/C/D to 1.0E.
Note that this program cannot be used for the CD-W524E with a firmware
revision other than 1.0A/B/C/D. |
|
|
|
The contents
of the updated firmware |
< F/W 1.0A -> 1.0B > |
· |
When starting or changing the track of Audio CD, in some cases, it
took relatively long time to start The starting time was shortened. |
· |
In some cases, the drive could not read the ISRC of the CD-R and CD-RW
disc. This problem was corrected. |
· |
After writing 99 track data with Track-At-Once operation, in some cases,
there was an error at "finalization". This problem was corrected. |
· |
Writing quality was improved. |
< F/W 1.0B -> 1.0C > |
· |
Some of high-speed CD-RW media write performance is to be improved. |
< F/W 1.0C -> 1.0D > |
· |
The drive supported "Mt. Rainier". |
· |
Corrected the F/W to avoid an abnormal operation during drive start-up
when a disc with illegal TOC information is loaded. |
< F/W 1.0D -> 1.0E > |
· |
It supporeted to read Ultra Speed CD-RW disk. (Not supported to write.) |
|
|
|
|
Precautions |
The CD-W524E firmware update utility (UpdaterW524E.exe)
is exclusively for the CD-W524E(with a firmware revision of 1.0A/B/C/D).
This program updates the firmware for the TEAC CD-W524E to 1.0E.
Note that this program cannot be used for the CD-W524E with a firmware
revision other than 1.0A/B/C/D.
Observe the following precautions in executing
the UpdaterW524E.exe. |
· |
Extract the program onto your hard drive and
execute it. |
· |
Do not change the program name nor its contents. |
· |
Read the Readme.txt before executing. |
· |
Do not turn off the power of your PC and the
drive while executing UpdaterW524E.exe. |
· |
Eject any media in the CD-W524E before executing
the program. |
· |
There is a case that Firmware update can not
be executed if the certain Packet Write Application is actvated. In that
case, please close Packet Write Application and execute this program. |
If the drive that you are using has F/W 1.0A/B/C, please
update to 1.0D first and continue to update to 1.0E by following
the instruction below.
If your drive F/W version is 1.0A/B/C, the Updater will update the F/W
to 1.0D. After updating the F/W to 1.0D, reboot your PC and execute the
Updater again.?@Then the F/W will be updated to 1.0E. If your drive F/W
version is 1.0D, the Updater will update the F/W to 1.0E. The F/W version
will be displayed when you launch this Updater (Update program) as shown
in figure attached. |
 |
|
|
|
|
Self-Extracting
file name |
Date |
Size |
|
FWUPW524E04.EXE |
2003/03/27 |
1,350,986 Byte |
Firmware Updater
UpdaterW524E.exe |
|
|
|